Products 1、This machine tool can be used for diamond grinding wheel, CBN grinding wheel and grinding wheel group composed of multiple grinding wheels. Soft grind hard. The method provides simple and efficient dressing for dressing the outer circle of the grinding wheel, the plane of the end face, the inclined plane, the Angle, the arc and the forming wheel. The machine is not only simple to operate, but also highly accurate. The spindle grinding wheel of the machine tool is the dressed diamond grinding wheel or CBN grinding wheel, and the grinding wheel mounted on the attachment is the dressing grinding wheel, namely the green silicon carbide grinding wheel. Two directions of the trimmed grinding wheel can be adjusted, namely X axis and Y axis; The dressing grinding wheel can be adjusted in three directions, that is, rotating axis A, axis X1 and axis Y1, and reciprocating swing with frequency control. In addition, the rotation and positioning between axis X1 and axis Y1 can be realized, so that the dressing grinding wheel can do 180°. Rotate. 2、Each straight spindle of this machine adopts high precision cross ball guide rail and screw, equipped with digital display grating ruler, so that the positioning accuracy, width size and arc size can be adjusted and measured at any time when the trimmed grinding wheel is being trimmed. Manual rotation A shaft adopts imported high precision taper roller bearings to achieve rotation accuracy and smoothness. The speed of dressing grinding wheel, left-right swing speed, swing stroke size, and position of grinding wheel can be adjusted. Machine tool loaded EDIS measuring system, LCD display. It can draw the graph of grinding wheel, measure the length, arc, Angle size online, and observe the physical scene with microscope. CAD software compatible, graphics can be imported and exported. And can be with C machine tool CCD photography device attached with magnification 10 to 50 times lens and 19 "; Liquid crystal display can be used to measure and test the arc, Angle and size of grinding wheel. CCD and optical sizing devices provide easy use for setting and measuring the width and position of the grinding wheel as well as for inspection during or after dressing. The measuring accuracy can reach 0.005mm. Dressing grinding wheel manual feed, feed accuracy 0.01mm. The machine can also choose to be equipped with air cleaning device, or water mist dust removal device, or cooling oil device. Can provide different dressing wheel bar and flange butt conversion, or custom special spindle. Product parameter
