Daily maintenance methods and precautions of grinder
Date：2020-05-08
Share
Daily maintenance of grinder
The grinder must have a special person responsible for maintenance and use, and regular maintenance to ensure that the machine is in good condition.
1. After the operation is completed, all parts of the machine, especially the sliding parts, should be wiped clean and oiled.
2. Remove abrasive debris from various parts of the grinder.
3. Anti-rust on necessary parts.
Precautions for using the above grinder
1. Before grinding, please correct the wheel balance.
2. The grinding wheel must be carefully selected according to the material and hardness of the work.
3. Thin oil film should be coated on the spindle end and the wheel flange to prevent rust.
4. Pay attention to the direction of rotation of the spindle.
5. It is forbidden to use air guns to clean work and machines.
6. Please pay attention to the smoothness of the oil window.
7. Vacuum box, filter steel, please clean once a week.
8. When the suction power is weak, please check whether the dust suction pipe is blocked by dust.
9. The dust suction pipe must be kept clean, otherwise it will cause burning.
Grinder suction cup maintenance
* The surface of the magnetic casting chuck or electromagnetic chuck is the basis for whether the grinding accuracy of the work can be obtained, and it should be properly maintained and maintained. If the accuracy of the work object is poor or the surface of the disk is damaged, the surface of the disk must be reground, and the accuracy of the surface of the disk meets the requirements to ensure the accuracy of the work.
